HP E4510-48G, Справочник по командам

Страница: 1178 / 1334

16-1
16
Information Center Configuration Commands
Information Center Configuration Commands
display channel
Syntax
display channel [ channel - number | channel - name ]
View
Any view
Default Level
1: Monitor level
Parameters
channel - number : Displays information of the channel with a specified number, where channel-number
represents the channel number, in the range 0 to 9.
channel - name : Displays information of the channel with a specified name, where channel-name
represents the channel name, which could be a default name or a self-defined name. The user needs
to specify a channel name first before using it as a self-defined channel name. For more information,
refer to the info-center channel name command.
Table 16-1 Information channels for different output destinations
Output destination Information channel number Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP module 5 snmpagent
Description
Use the display channel command to display channel information.
If no channel is specified, information for all channels is displayed.
Examples
# Display information for channel 0.
<Sysname> display channel 0