HP E4510-48G, Справочник по командам

Страница: 1331 / 1334

22-6
Default Level
1: Monitor level
Parameters
node node-id : Displays the IPC performance statistics information of the specified node, where
node-id represents the number of the specified node, in the range of 0 to 9.
self-node : Displays the IPC performance statistics information of the local node.
channel channel-id : Displays the IPC performance statistics information of the specified channel,
where channel-id represents the channel number, in the range of 0 to 159.
Description
Use the display ipc performance command to display IPC performance statistics information.
If IPC performance statistics is enabled, the command displays the current IPC performance statistics;
if IPC performance statistics is disabled, the command displays the IPC performance statistics at the
time when IPC performance statistics is disabled.
Related commands: ipc performance enable .
Examples
# Display IPC performance statistics information of node 6 .
<Sysname> display ipc performance node 6
Peak: Peak rate (pps)
10Sec: Average rate in the last 10 seconds (pps)
1Min: Average rate in the last 1 minute (pps)
5Min: Average rate in the last 5 minutes (pps)
Total-Data: Total number of data (packets)
Statistics for packets sent successfully:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 80
Statistics for packets recieved successfully:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 82
Statistics for packets acknowledged:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 78
Table 22-6 display ipc performance command output description
Field Description
Peak
Peak rate (average rate is counted every 10 seconds, the greatest
value of which is taken as the peak rate), in pps
10Sec Average rate in the past 10 seconds, in pps
1Min Average rate in the past 1 minute, in pps