HP E4510-48G, Справочник по командам

Страница: 1332 / 1334

22-7
Field Description
5Min Average rate in the past 5 minutes, in pps
Total-Data
Total amount of data collected from the time when IPC performance
statistics was enabled to the time when this command is executed
display ipc queue
Syntax
display ipc queue { node node-id | self-node }
View
Any view
Default Level
1: Monitor level
Parameters
node node-id : Displays the sending queue information of the specified node, where node-id
represents the number of the specified node, in the range of 0 to 9.
self-node : Displays the sending queue information of the local node.
Description
Use the display ipc queue command to display the sending queue information of the specified node.
Examples
# Display the sending queue information of the local node.
<Sysname> display ipc queue self-node
QueueType QueueID Dst-NodeID Length FullTimes Packet
------------------------------------------------------------
UNICAST 0 0 4096 0 0
UNICAST 1 0 4096 0 0
UNICAST 2 0 4096 0 0
UNICAST 3 0 4096 0 0
UNICAST 0 1 4096 0 0
UNICAST 1 1 4096 0 0
UNICAST 2 1 4096 0 0
UNICAST 3 1 4096 0 0
MULTICAST 0 -- 4096 0 0
MULTICAST 1 -- 4096 0 0
MULTICAST 2 -- 512 0 0
MULTICAST 3 -- 512 0 0
MULTICAST 4 -- 512 0 0
MULTICAST 5 -- 512 0 0
MIXCAST 0 -- 2048 0 0
MIXCAST 1 -- 2048 0 0