HP E4510-48G, Справочник по командам

Страница: 1319 / 1334

21-7
This function is enabled by default.
Note the following:
z
Before adding a device into an IRF, ensure that the device and the IRF master have the same
software version
z
After loading the master’s boot file automatically, a slave configures the file as the boot file for the
next boot and reboots automatically.
z
Because system boot file occupies large memory space, to make the auto upgrade succeed,
ensure that there is enough space on the storage media of the slave.
z
If the downloaded boot file and the local file have duplicate filenames, the local file is overwritten.
To avoid this, check the names of local files and make sure whether you need to save the one with
the same filename or back it up before downloading the boot file.
Examples
# Enable auto upgrade of boot files in an IRF.
<Sysname> system-view
[Sysname] irf auto-update enable
irf link-delay
Syntax
irf link-delay interval
undo irf link-delay
View
System view
Default Level
3: Manage level
Parameters
Interval : Time interval in milliseconds for the link layer to report a link-down event of an IRF, in the
range 200 to 2000.
Description
Use the irf link-delay command to set the delay time for the link layer to report a link-down state event
of an IRF.
Use the undo irf link-delay command to restore the default.
This function is disabled by default.
Examples
# Set the delay time for the link layer to report a link-down event of the current IRF to 300 milliseconds.
<Sysname> system-view
[Sysname] irf link-delay 300