HP E4510-48G, Справочник по командам

Страница: 928 / 1334

6-14
MAC Address TTL Forwarded Relay Action
00E0-FC27-6502 63 No None
Table 6-6 display cfd linktrace-reply auto-detection command output description
Field Description
Service instance Service instance to which the MEPs that sent LTM messages belong
MEP ID ID of the MEP that sends LTMs
Time Time of the LTMs automatically sent
Target MEP ID ID of the target MEP
TTL Initial hop count of the automatically sent LTMs
MAC Address Source MAC address in the LTR messages
TTL Hop count when LTM passes the device
Forwarded
z
Yes means that the device has forwarded the LTMs.
z
No means that the device did not forward the LTMs.
Relay Action
Indicates whether the forwarding device found the destination MAC
address in its MAC address table.
z
Found: Indicates that the forwarding device found the destination MAC
address in its MAC address table.
z
Unknown: Indicates that the forwarding device failed to find the
destination MAC address in its MAC address table.
z
None: Indicates that it is a MEP that responded to the LTM message.
A MEP does not need to find the destination MAC address.
display cfd ma
Syntax
display cfd ma [ [ ma-name ] md md-name ]
View
Any view
Default level
2: System level
Parameters
ma-name : Name of MA, ranging from 1 to 48 characters, composed of letters, numbers or underlines,
but cannot start with an underline character.
md md-name : Specifies the name of an MD, ranging from 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
Description
Use the display cfd ma command to display the configuration of a specified MA.
Note that:
z
If MD is not specified, this command will display the MA configurations of all MDs on the device.
z
If both MD and MA are specified, this command will display the specified MA configuration.