HP E4510-48G, Справочник по командам

Страница: 730 / 1334

8-6
Field Description
xxx mac address(es) found Number of secure MAC addresses stored
port-security authorization ignore
Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Layer 2 Ethernet interface view
Default Level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the RADIUS server.
Use the undo port-security port-mode ignore command to restore the default.
By default, a port uses the authorization information from the RADIUS server.
After a user passes RADIUS authentication, the RADIUS server performs authorization based on the
authorization attributes configured for the user’s account. For example, it may assign a VLAN.
Related commands: display port-security .
Examples
# Configure port GigabitEthernet 1/0/1 to ignore the authorization information from the RADIUS server.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security authorization ignore
port-security enable
Syntax
port-security enable
undo port-security enable
View
System view
Default Level
2: System level