HP E4510-48G, Справочник по командам

Страница: 315 / 1334

7-6
dhcp-snooping information remote-id string
Syntax
dhcp-snooping information [ vlan vlan-id ] remote-id string { remote-id | sysname }
undo dhcp-snooping information [ vlan vlan-id ] remote-id string
View
Layer 2 Ethernet port view
Default Level
2: System level
Parameters
vlan vlan-id : Specifies a VLAN ID, in the range of 1 to 4094.
remote-id : Padding content for the user-defined circuit ID sub-option, a case-sensitive string of 1 to 63
characters.
sysname : Specifies the device name as the padding content for the remote ID sub-option.
Description
Use the dhcp-snooping information remote-id string command to configure the padding content for
the user-defined remote ID sub-option.
Use the undo dhcp-snooping information remote-id string command to restore the default.
By default, the padding content for the remote ID sub-option depends on the padding format of Option
82.
Note that:
z
After you configure the padding content for the remote ID sub-option using this command, ASCII
is adopted as the code type.
z
If a VLAN is specified, the configured remote ID sub-option only takes effect within the VLAN; if no
VLAN is specified, the configured remote ID sub-option takes effect in all VLANs. The former case
has a higher priority; that is, the remote ID sub-option configured for a VLAN will be padded for the
packets within the VLAN.
Related commands: dhcp-snooping information format .
If you want to specify the character string sysname (a case-insensitive character string) as the
padding content for the remote ID sub-option, you need to use quotation marks to make it take effect.
For example, if you want to specify Sysname as the padding content for the remote ID sub-option, you
need to enter the dhcp relay information remote-id string “Sysname” command.
Examples
# Configure the padding content for the remote ID sub-option as device001 .