HP E4510-48G, Справочник по командам

Страница: 235 / 1334

10-2
z
The nest action cannot be applied to a VLAN or globally.
Related commands: qos policy , traffic behavior , classifier behavior .
Examples
# Configure an outer VLAN tag for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] nest top-most vlan-id 100
raw-vlan-id inbound
Syntax
raw-vlan-id inbound { all | vlan-list }
undo raw-vlan-id inbound { all | vlan-list }
View
QinQ view
Default Level
2: System level
Parameters
vlan-list : Specifies one or multiple CVLANs in the format of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>.
You can provide up to 10 VLAN ID lists, by each of which you can specify an individual VLAN ID in the
form of vlan-id , or a VLAN ID range in the form of vlan-id to vlan-id , where the VLAN ID after to must
be greater than the VLAN ID before to . The vlan-id argument ranges from 1 to 4094.
all : Specifies all VLAN IDs.
Description
Use the raw-vlan-id inbound command to tag frames of the specified CVLANs with the current
SVLAN.
Use the undo raw-vlan-id inbound command to remove the configuration.
z
You can run this command in the same view many times. A new configuration does not overwrite
the previous ones and the configured values are arranged in an ascending order automatically.
z
An inner VLAN tag corresponds to only one outer VLAN tag.
z
If you want to change the outer VLAN tag, you need to delete the old outer tag configuration and
then configure a new outer VLAN tag.
Related commands: qinq vid .