HP E4510-48G, Справочник по командам

Страница: 873 / 1334

3-3
Table 3-1 display rrpp brief command output description
Field Description
Flags for Node Mode
RRPP node mode
z
M represents master node
z
T represents transit node
z
E represents edge node
z
A represents assistant edge node
RRPP Protocol Status
RRPP protocol status
z
Enable (globally enabled)
z
Disable (globally disabled)
Number of RRPP Domains Number of RRPP domains configured
Domain ID RRPP domain ID
Control VLAN Control VLANs of the RRPP domain: Major and Sub
Protected VLAN
List of VLANs protected by the RRPP domain. MSTIs are displayed
here. To get the VLANs corresponding to these MSTIs, use the
display stp region-configuration command.
Hello Timer
Hello Timer value in seconds
Fail Timer
Fail Timer value in seconds
Ring ID
RRPP ring ID
Ring Level
RRPP ring level
z
0 representing primary ring
z
1 representing subring
Node Mode
Node mode
Primary/Common Port
z
Primary port when the node mode is master node or transit node
z
Common port when the node mode is edge node or assistant
edge node
z
“-“ appears when the port is not configured on the ring or the
board to which the port belongs does not start
Secondary/Edge Port
z
Secondary port when the node mode is master node or transit
node
z
Edge port when the node mode is edge node or assistant edge
node
z
“-“ appears when the port is not configured on the ring or the
board to which the port belongs does not start
Enable Status
RRPP ring status
z
Yes indicates enabled
z
No indicates disabled
display rrpp ring-group
Syntax
display rrpp ring-group [ ring-group-id ]
View
Any view