HP E4510-48G, Справочник по командам

Страница: 648 / 1334

2-1
2
RADIUS Configuration Commands
RADIUS Configuration Commands
data-flow-format (RADIUS scheme view)
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
View
RADIUS scheme view
Default Level
2: System level
Parameters
data : Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet : Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the data-flow-format command to specify the unit for data flows or packets to be sent to a
RADIUS server.
Use the undo data-flow-format command to restore the default.
By default, the unit for data flows is byte and that for data packets is one-packet .
Note that:
z
The specified unit of data flows sent to the RADIUS server must be consistent with the traffic
statistics unit of the RADIUS server. Otherwise, accounting cannot be performed correctly.
z
You can use the commands to change the settings only when no user is using the RADIUS
scheme.
Related commands: display radius scheme .
Examples
# Define RADIUS scheme radius1 to send data flows and packets destined for the RADIUS server in
kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet