HP E4510-48G, Справочник по командам

Страница: 57 / 1334

1-3
letters), special English characters, spaces, and other characters or symbols that conform to the
Unicode standard.
z
A port description can be the mixture of English characters and other Unicode characters. The
mixed description cannot exceed the specified length.
z
To use a type of Unicode characters or symbols in a port description, you need to install the
corresponding Input Method Editor (IME) and log in to the device through remote login software
that supports this character type.
z
Each Unicode character or symbol (non-English characters) takes the space of two regular
characters. When the length of a description string reaches or exceeds the maximum line width on
the terminal software, the software starts a new line, possibly breaking a Unicode character into
two. As a result, garbled characters may be displayed at the end of a line.
Description
Use the description command to set the description string of the current interface.
Use the undo description command to restore the default.
By default, the description of an interface is the interface name followed by the “interface” string,
GigabitEthernet1/0/1 Interface for example.
Related commands: display interface .
Examples
# Configure the description string of interface GigabitEthernet 1/0/1 as lanswitch-interface .
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] description lanswitch-interface
display brief interface
Syntax
display brief interface [ interface-type [ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type : Type of a specified interface.
interface-number : Number of a specified interface.