HP E4510-48G, Справочник по командам

Страница: 625 / 1334

1-10
none : Does not perform any authorization. In this case, an authenticated user is automatically
authorized with the corresponding default rights.
Description
Use the authorization command command to configure the authorization method for command line
users.
Use the undo authorization command command to restore the default.
By default, the default authorization method is used for command line users.
Note that:
z
The HWTACACS scheme specified for the current ISP domain must have been configured.
z
For local authorization, the local users must have been configured for the command line users on
the device, and the level of the commands authorized to a local user must be lower than or equal
to that of the local user. Otherwise, local authorization will fail.
Related commands: authorization default , hwtacacs scheme .
Examples
# Configure the default ISP domain system to use HWTACACS authorization scheme hw for
command line users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization command hwtacacs-scheme hw
# Configure the default ISP domain system to use HWTACACS authorization scheme hw for
command line users and use local authorization as the backup.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization command hwtacacs-scheme hw local
authorization default
Syntax
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo authorization default
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name : Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
local : Performs local authorization.