HP E4510-48G, Справочник по командам

Страница: 1203 / 1334

17-1
17
Hotfix Configuration Commands
Hotfix Configuration Commands
display patch information
Syntax
display patch information
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display patch information command to display the hotfix information.
Examples
# Display hotfix information.
<Sysname> display patch information
The location of patches: flash:/
Slot Version Temporaty Common Current Active Running Start-Address
----------------------------------------------------------------------
1 XXX002 0 1 1 0 0 0x4accf74
2 XXX 0 0 0 0 0 0x4accf74
Table 17-1 display patch information command output description
Field Description
The location of patches
Patch file location. You can configure it using the patch location
command.
Slot Member ID
Version
Patch version. The first three characters represent the suffix of the
PATCH-FLAG. For example, if the PATCH-FLAG of the a device is
PATCH-RPE, "RPE" is displayed. The following three digits, if any,
represent the patch number. (The patch number can be read after
the patch is loaded.)
Temporary Number of temporary patches
Common Number of common patches