HP E4510-48G, Справочник по командам

Страница: 224 / 1334

9-2
GARP statistics on port GigabitEthernet1/0/1
Number of GVRP Frames Received : 0
Number of GVRP Frames Transmitted : 0
Number of Frames Discarded : 0
GARP statistics on port GigabitEthernet1/0/2
Number of GVRP Frames Received : 0
Number of GVRP Frames Transmitted : 0
Number of Frames Discarded : 0
display garp timer
Syntax
display garp timer [ interface interface-list ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-list : Defines one or multiple Ethernet ports. You can provide up to 10 Ethernet port
lists, by each of which you can specify an individual port in the form of interface-type interface-number ,
or a port range in the form of interface-type interface-number1 to interface-type interface-number2 ,
where the end-port number specified by interface-number2 must be greater than the start-port number
specified by interface-number1 . If no ports are specified, this command displays the GARP timer
settings on all ports.
Description
Use the display garp timer command to display GARP timer settings of specific ports.
Related commands: garp timer hold , garp timer join , garp timer leave , garp timer leaveall .
Examples
# Display GARP timers on port GigabitEthernet 1/0/1.
<Sysname> display garp timer interface gigabitethernet 1/0/1
GARP timers on port GigabitEthernet1/0/1
Garp Join Time : 20 centiseconds
Garp Leave Time : 60 centiseconds
Garp LeaveAll Time : 1000 centiseconds
Garp Hold Time : 10 centiseconds