HP E4510-48G, Справочник по командам

Страница: 1021 / 1334

4-19
Field Remarks
RX power low Incoming (RX) power level is low.
TX fault Transmit (TX) fault
TX bias high TX bias current is high.
TX bias low TX bias current is low.
TX power high TX power is high.
TX power low TX power is low.
Temp high Temperature is high.
Temp low Temperature is low.
Voltage high Voltage is high.
Voltage low Voltage is low.
Transceiver info I/O error Transceiver information read and write error
Transceiver info checksum error Transceiver information checksum error
Transceiver type and port configuration
mismatch
Transceiver type does not match port configuration.
Transceiver type not supported by port
hardware
Transceiver type is not supported on the port.
XFP
RX loss of signal Incoming (RX) signal is lost.
RX not ready RX is not ready
RX CDR loss of lock RX clock cannot be recovered.
RX power high RX power is high.
RX power low RX power is low.
TX not ready TX is not ready.
TX fault TX fault
TX CDR loss of lock TX clock cannot be recovered.
TX bias high TX bias current is high.
TX bias low TX bias current is low.
TX power high TX power is high.
TX power low TX power is low.
Module not ready Module is not ready.
APD supply fault APD (Avalanche Photo Diode) supply fault
TEC fault TEC (Thermoelectric Cooler) fault
Wavelength unlocked
Wavelength of optical signal exceeds the
manufacturer’s tolerance.
Temp high Temperature is high.
Temp low Temperature is low.
Voltage high Voltage is high.