HP E4510-48G, Справочник по командам

Страница: 226 / 1334

9-4
GVRP state of VLAN 2 on port GigabitEthernet1/0/1
Applicant state machine : VP
Registrar state machine : MTR
display gvrp statistics
Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-list : Defines one or multiple Ethernet ports. You can provide up to 10 Ethernet port
lists, by each of which you can specify an individual port in the form of interface-type interface-number ,
or a port range in the form of interface-type interface-number1 to interface-type interface-number2 ,
where the end-port number specified by interface-number2 must be greater than the start-port number
specified by interface-number1 . If no ports are specified, this command displays the GVRP statistics
for all trunk ports.
Description
Use the display gvrp statistics command to display the GVRP statistics of specified or all trunk ports.
Examples
# Display statistics about GVRP for trunk port GigabitEthernet 1/0/1.
<Sysname> display gvrp statistics interface gigabitethernet 1/0/1
GVRP statistics on port GigabitEthernet1/0/1
GVRP Status : Enabled
GVRP Running : YES
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 000F-E207-F2E0
GVRP Registration Type : Normal
Table 9-1 display gvrp statistics command output description
Field Description
GVRP Status Indicates whether GVRP is enabled or disabled.
GVRP Running Indicates whether GVRP is running.
GVRP Failed Registrations Indicates the number of GVRP registration failures.
GVRP Last Pdu Origin Indicates the source MAC address in the last GVRP PDU.
GVRP Registration Type Indicates the GVRP registration type on the port.