HP E4510-48G, Справочник по командам

Страница: 1172 / 1334

15-5
z
If no response from the destination is received within the timeout time, the interval to send the next
echo request equals the timeout value plus the value of interval.
-s packet-size : Specifies length (in bytes) of an ICMPv6 echo request, in the range 20 to 8100. It
defaults to 56.
-t timeout : Specifies the timeout value (in milliseconds) of an ICMPv6 echo reply, in the range 0 to
65535. It defaults to 2000.
remote-system : IPv6 address or host name of the destination device, a string of 1 to 46 characters.
-i interface-type interface-number : Specifies an outgoing interface by its type and number. This
parameter can be used only in case that the destination address is the link local address and the
specified outgoing interface must have a link local address (For the configuration of link local address,
see IPv6 Basics in the IP Services Volume ).
Description
Use the ping ipv6 command to verify whether an IPv6 address is reachable, and display the
corresponding statistics.
You must use the command in the form of ping ipv6 ipv6 instead of ping ipv6 if the destination name
is an ipv6 name.
During the execution of the command, you can press Ctrl+C to abort the ping ipv6 operation.
Examples
# Verify whether the IPv6 address 2001::1 is reachable.
<Sysname> ping ipv6 2001::1
PING 1::2 : 56 data bytes, press CTRL_C to break
Reply from 1::2
bytes=56 Sequence=1 hop limit=64 time = 4 ms
Reply from 1::2
bytes=56 Sequence=2 hop limit=64 time = 2 ms
Reply from 1::2
bytes=56 Sequence=3 hop limit=64 time = 2 ms
Reply from 1::2
bytes=56 Sequence=4 hop limit=64 time = 2 ms
Reply from 1::2
bytes=56 Sequence=5 hop limit=64 time = 2 ms
--- 1::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/4 ms
The “hop limit” field in this prompt information has the same meaning as the “ttl” field in the prompt
information displayed by the IPv4 ping command, indicating the TTL value in the ICMPv6 echo
request. For the description on other fields, refer to Table 15-1 .