HP E4510-48G, Справочник по командам

Страница: 208 / 1334

6-29
all : Specifies all the VLANs.
Description
Use the display ip-subnet-vlan vlan command to display the IP subnet information and IP subnet
indexes on the specified VLAN(s).
Related commands: display vlan .
Examples
# Display the IP subnet information of all VLANs.
<Sysname> display ip-subnet-vlan vlan all
VLAN ID: 3
Subnet Index IP Address Subnet Mask
====================================================
0 192.168.1.0 255.255.255.0
Table 6-7 display ip-subnet-vlan vlan command output description
Field Description
VLAN ID VLAN ID
Subnet Index IP subnet index
IP Address IP address of the subnet (can be an IP address or a network address)
Subnet Mask Mask of the IP subnet
ip-subnet-vlan
Syntax
ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ]
undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all }
View
VLAN view
Default Level
2: System level
Parameters
ip-subnet-index : Beginning IP subnet Index, in the range of 0 to 11. This value can be configured by
users, or automatically numbered by system based on the order in which the IP subnets or IP
addresses are associated with the VLAN.
ip ip-address [ mask ]: Specifies the source IP address or network address based on which the
subnet-based VLANs are classified, in dotted decimal notation. The mask argument is the subnet
mask of the source IP address or network address, in dotted decimal notation with a default value of
255.255.255.0.
to : Specifies an IP subnet index range.