HP E4510-48G, Справочник по командам

Страница: 486 / 1334

6-5
View
Route policy view
Default Level
2: System level
Parameters
interface-type : Interface type
interface-number : Interface number
&<1-16> : Indicates the argument before it can be entered up to 16 times.
Description
Use the if-match interface command to specify interface(s) for matching against the outbound
interface of routing information.
Use the undo if-match interface command to remove the match criterion.
The match criterion is not configured by default.
Related commands: if-match acl , if-match ip-prefix , if-match ip next-hop , if-match cost , if-match
tag , route-policy , apply ip-address next-hop , apply cost , apply tag .
Examples
# Configure node 10 in permit mode of route policy policy1 to permit routing information with the
outbound interface as VLAN-interface 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match interface vlan-interface 1
if-match tag
Syntax
if-match tag value
undo if-match tag
View
Route policy view
Default Level
2: System level
Parameters
value : Specifies a tag from 0 to 4294967295.
Description
Use the if-match tag command to match routing information having the specified tag.
Use the undo if-match tag command to remove the match criterion.
The match criterion is not configured by default.