7-5
Note that when you use the
undo dhcp-snooping information format
command, if the
verbose
node-identifier
argument is not specified, the padding format will be restored to
normal
; if the
verbose
node-identifier
argument is specified, the padding format will be restored to
verbose
with
MAC address as the node identifier.
Examples
# Specify the padding format as
verbose
for Option 82.
<Sysname> system-view
[Sysname] interface gigabitethernet1/0/1
[Sysname-GigabiEthernet1/0/1] dhcp-snooping information enable
[Sysname-GigabiEthernet1/0/1] dhcp-snooping information strategy replace
[Sysname-GigabiEthernet1/0/1] dhcp-snooping information format verbose
dhcp-snooping information remote-id format-type
Syntax
dhcp-snooping information remote-id format-type
{
ascii
|
hex
}
undo dhcp-snooping information remote-id format-type
View
Layer 2 Ethernet port view
Default Level
2: System level
Parameters
ascii
: Specifies the code type for the remote ID sub-option as
ascii
.
hex
: Specifies the code type for the remote ID sub-option as
hex
.
Description
Use the
dhcp-snooping information remote-id format-type
command to configure the code type for
the non-user-defined remote ID sub-option.
Use the
undo dhcp-snooping information remote-id format-type
command to restore the default.
By default, the code type for the remote ID sub-option is HEX.
Note that:
This command applies to configuring a non-user-defined remote ID sub-option only. After you
configure the padding content for the remote ID sub-option using the
dhcp-snooping information
remote-id string
command, ASCII is adopted as the code type.
Examples
# Configure the code type for the non-user-defined remote ID sub-option as
ascii
.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabiEthernet1/0/1] dhcp-snooping information remote-id format-type ascii
Содержание E4510-48G
