HP E4510-48G, Справочник по командам

Страница: 450 / 1334

3-16
Examples
# Clear statistics in RIP process 100.
<Sysname> reset rip 100 statistics
rip
Syntax
rip [ process-id ]
undo rip [ process-id ]
View
System view
Default Level
2: System level
Parameters
process-id : RIP process ID, in the range of 1 to 65535. The default is 1.
Description
Use the rip command to create a RIP process and enter RIP view.
Use the undo rip command to disable a RIP process.
By default, no RIP process runs.
Note that:
z
You must enable the RIP process before configuring the global parameters. This limitation is not
for configuration of interface parameters.
z
The configured interface parameters become invalid after you disable the RIP process.
Examples
# Create a RIP process and enter RIP process view.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1]
rip authentication-mode
Syntax
rip authentication-mode { md5 { rfc2082 key-string key-id | rfc2453 key-string } | simple password }
undo rip authentication-mode
View
Interface view
Default Level
2: System level