HP E4510-48G, Справочник по командам

Страница: 522 / 1334

1-23
overflow-replace (IGMP-Snooping view)
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
View
IGMP-Snooping view
Default Level
2: System level
Parameters
vlan vlan-list : Defines one or multiple VLANs. You can provide up to 10 VLAN lists, by each of which
you can specify an individual VLAN in the form of vlan-id , or a VLAN range in the form of start-vlan-id
to end-vlan-id , where the end VLAN ID must be greater than the start VLAN ID. The effective range of
a VLAN ID is 1 to 4094.
Description
Use the overflow-replace command to enable the multicast group replacement function globally.
Use the undo overflow-replace command to disable the multicast group replacement function
globally.
By default, the multicast group replacement function is disabled.
Note that:
z
This command works on IGMP Snooping–enabled VLANs.
z
If you do not specify any VLAN, the command will take effect for all VLANs; if you specify a VLAN
or multiple VLANs, the command will take effect for the specified VLAN(s) only.
Related commands: igmp-snooping overflow-replace .
Examples
# Enable the multicast group replacement function globally in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] overflow-replace vlan 2
report-aggregation (IGMP-Snooping view)
Syntax
report-aggregation
undo report-aggregation
View
IGMP-Snooping view