HP E4510-48G, Справочник по командам

Страница: 1197 / 1334

16-20
GigabitEthernet1/0/1: link status is DOWN
# Configure the timestamp format for log information as date .
<Sysname> system-view
[Sysname] info-center timestamp log date
At this time, if you execute the shutdown command on GigabitEthernet1/0/1 that is in the UP state, the
log information generated is as follows:
%Sep 29 17:19:11:188 2007 Sysname IFNET/4/LINK UPDOWN:
GigabitEthernet1/0/1: link status is DOWN
# Configure the timestamp format for log information as none .
<Sysname> system-view
[Sysname] info-center timestamp log none
At this time, if you execute the shutdown command on GigabitEthernet1/0/1 that is in the UP state, the
log information generated is as follows:
% Sysname IFNET/4/LINK UPDOWN:
GigabitEthernet1/0/1: link status is DOWN
info-center timestamp loghost
Syntax
info-center timestamp loghost { date | no-year-date | none }
undo info-center timestamp loghost
View
System view
Default Level
2: System level
Parameters
date : Indicates the current system date and time, in the format of "Mmm dd hh:mm:ss:ms yyyy".
However, the display format depends on the log host.
no-year-date : Indicates the current system date and time (year exclusive).
none : Indicates that no time stamp information is provided.
Description
Use the info-center timestamp loghost command to configure the time stamp format of the system
information sent to the log host.
Use the undo info-center timestamp loghost command to restore the default.
By default, the time stamp format for system information sent to the log host is date.
Examples
# Configure that the system information output to the log host does not include the year information.
<Sysname> system-view
[Sysname] info-center timestamp loghost no-year-date