100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 214
4.5 NETWORK KEY
Note: This manual does not describe network setup in detail, as each network is different. In most
cases, the help of the network administrator or supervisor will be required, for example, in the al-
location of valid addresses and passwords.
Touching the Network key calls a selection box to the display, allowing ‘Address’ or ‘Name’ to be selected
for confi guration.
4.5.1 Address
Figure 4.5.1 shows the address menu fi elds.
Figure 4.5.1 Network addressing
INSTRUMENT NUMBER/ MAC ADDRESS
Unique numbers set up during manufacture to identify the recorder to a remote host, or to the recorder
manufacturer/distributor, in case of query.
IP ADDRESS LOOKUP
This fi eld allows an address to be entered for the recorder. This can be done either by manually entering
an address (IP address fi eld - below), or a network service BootP or DHCP can be used to assign an IP
address to the recorder.
BOOTP TIMEOUT
This parameter only appears if ‘IP address lookup’ is set to ‘Get from BootP Server’. This 28 second pe-
riod is the maximum time the recorder will wait, at power-up, for a response from the BootP server. If no
response is received within this time, the IP address, Subnet mask and Default gateway are all set to, or
remain at ‘0.0.0.0’.
Archive Save/Restore
Config
Security
Network System
MAC address
IP address lookup
IP address
Subnet mask
255.255.255.0
Default gateway
0.0.0.0
192.168.111.222
Instrument number
240
08:00:48:80:00:F0
Get from BootP Server
Fig 4.5.2
BootP timeout
28
s
SNTP server enable
SNTP server
149.121.128.179
SNTP client enable
G??"'#-=.(5-%U-@"&,#%$5-)'.'1"#-
=?$%=.-".'C("09
G??"'#/-=.(5-U=#-d\"$-U#=+-^==$L-@"#E"#d
Address
Name
EuroPRP server enable
Active Directory server
123.456.234.1
Active Directory security
TLS (port 636)
Select 'specify an IP address',
'Get from BootP Server' or
'Get from DHCP Server'
Password Cache expiry
G??(5
[%/&'#0
Days
0
SNTP timeout
22
s
