100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 42
3.4.3 CIRCULAR TREND (Cont.)
NORMAL VIEW FEATURES
Scales
Two scales are provided, one for the left hand side of the chart, the other for the right hand
side. Channel scaling is a part of channel confi guration, as described in
section 4.3.3
,
below. The scales apply only to values along the horizontal line through the centre of
the chart. Values for other angles (times) can be most easily found from the trace history,
selected from the Option key, or by touching anywhere in the chart or in the green back-
ground area for a few seconds.
Chart speed This displays the currently selected speed of revolution of the chart. This speed is set up as
a part of Group confi guration (
section 4.3.2
)
Faceplates
Up to 12 faceplates can be displayed, giving point values and alarm indication.
Message Bar The message bar at the bottom of the screen displays the latest message. If an up arrow
appears at the right hand end of the bar, there is more than one message. Touching the
message bar calls a ‘View Messages’ window, detailing previous messages. See the de-
scription in
section 3.4.2
for more details.
FULL SCREEN DISPLAY
As shown in fi gure 3.4.3c, below, this maximizes the chart diameter, leaving only the chart, chart speed
and faceplates (if selected on) on display. The fi gure shows a view with faceplates selected off. For the
large frame recorder, faceplate on/off selection can be made only from one of the other display modes,
as the navigation keys are not visible in this display mode.
Figure 3.4.3c Circular Trend full screen view (with faceplates selected off)
Group name
11:05:33
06/04/05
Logged out
Normal View
06/04/05 10:10
06/04/05 10:15
06/04/05 10:20
06/04/05 10:25
06/04/05 10:30
06/04/05 10:35
06/04/05 10:40
06/04/05 10:45
06/04/05 10:50
06/04/05 10:55
06/04/05 11:00
06/04/05 11:05
1 hr/rev
FULL SCREEN FEATURES
Faceplates
As described above for Normal View features
