100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 349
12.5.5 Serial Communications Confi guration
Enable ‘Alarms’ in the ‘Messages To Print’ area.
Press ‘Apply’.
A sample Printout is shown in fi gure 12.5.5, in which it can be seen that it was the Orange channel which
triggered the warning.
Note: In the example above the event trigger is ‘Unacknowledged alarm’. This means that once
the fi rst channel alarm becomes active and the relevant report printed, then no further reports will
be initiated until the alarm is acknowledged, no matter how many other channel alarms go active.
If, however, an unlatched alarm becomes inactive, this is the equivalent of its being acknowledged
as far as report printing is concerned. For latched alarms, each alarm must be acknowledged
before further reports can be triggered.
Figure 12.5.5 Example printout
