100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 335
10 EVENT INPUT OPTION
10.1 INTRODUCTION
Each Event input option board offers six isolated input circuits. Inputs can be either switch closures or
voltage levels.
Section 4.3.6
(Event confi guration) describes the use of events and how they can be combined to per-
form logic functions, if required. Job lists can be triggered by any event, either internal or as a result of
external events wired to an event input board.
If this option is fi tted, ‘Event input board’ appears as a event source, and the user must then specify a
board number and associated input number as required.
Figure 10.1 Event input selection
Event Number
1) Event 1
Source 1
Event Input Board
Board
1
Source 1 Sense
Source 1
Operator
Select Event Input board
Input
5
And
Select Input on associated board
Apply
Discard
10.2 SIGNAL WIRING
See
fi gure 2.2.1d
10.3 SPECIFICATION
See Annex A
