100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 236
4.7.10 Recording category
The following ‘Recording jobs’ are available:
Enable
This enables recording to the group’s history fi le, ‘while active’, ‘while inactive’ or
‘while unacknowledged’. This allows, for example, recording to be enabled (job 2)
only whilst a Trend Freeze job (job 1) is inactive (i.e recording is disabled for the dura-
tion of a Trend Freeze job). Trend freeze is described in section 4.7.11, below.
Speed/Interval B
Recording speed/interval B is selected for use, for the duration of the job. See
‘Group confi guration for A/B switching details.
Erase all History
All recorder history is erased (only if Simulation option -
section 4.3.22
- is enabled),
but see also note 4.
Notes:
1 The group in question will be recorded only if Recording Enable selected in group Confi gura-
tion (
section 4.3.2
) and the job is active.
2. If Audit Trail (
section 4.4.2
) is enabled, then in order to preserve the audit trail, messages will be
saved in the group’s history fi les even when recording is not enabled by job.
3. A blue line is drawn across the ‘chart’ whenever a recording job is used to disable/enable re-
cording.
4. If the 21CFR11 option is enabled, ‘Erase All History’ jobs can be triggered, but are ignored,
leaving the recording history unaffected.
Job Number
Recording
Category
Group
While
1) Group 1
1
Recording
Enable
Active
Select required action
Select required Group if appropriate
Select 'Active', 'Inactive' or 'Unacknowledged'
Figure 4.7.10 Recording job menu layout
