100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 13
HA028910
Issue 13 Sep 16
2.4.1 FLAP LOCK OPERATION (Cont.)
ARCHIVE ACTIVE
1. Touch the root menu key or alarm status area at the top of the screen.
2. Touch the ‘Unlock Flap’ key (fi gure 2.4.1a).
3. The fl ap unlocks for 5 seconds in the normal way (to allow access to the stylus and the usbfront port),
but a warning message appears on the screen (fi gure 2.4.1c).
a) If the ‘Cancel’ key is operated, the message disappears. Subsequently, if this is a Demand Ar-
chive the ‘Demand archive fi nished’ message appears when the archive is complete. Archiving
is not suspended, so operate the ‘Suspend Archiving’ key before removing the memory device.
This ensures that no attempt will be made by the recorder to write to the device until ‘Resume
Archiving’ is operated.
b) If the ‘Cancel’ key is not operated (the warning message remains on the screen), then when the
archive is complete, archiving is automatically suspended and the fl ap unlocks again for fi ve
seconds, allowing the memory device to be removed. The message on the screen changes to
‘OK to remove archive media’ (fi gure 2.4.1b), although, for demand archives this is masked by
the ‘Demand archive fi nished’ message.
Figure 2.4.1c ‘ Do Not Remove Archive Media’ message
4. Archiving automatically resumes:
a.
15 seconds (max.) after a memory device is inserted.
b. after 10 minutes if no new memory device is inserted (i.e. the fl ap was opened for a reason other
than to replace the memory device).
Note A System message is generated each time the fl ap is unlocked.
Will advise when OK to remove...
Cancel
DO NOT REMOVE Archive Media!
