100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 96
4.3.8 MESSAGES (Cont.)
Replace {n} with (Cont.)
Specifi ed Descriptor, Specifi ed Value, Specifi ed Alarm data: Produces a further fi eld
‘{n} source’, described below.
Batch Status: Causes the status (‘Active’ or ‘Inactive’) of the current batch to be em-
bedded. See
Section 4.3.10
for details of the Batch option.
Batch Field data: Allows a selected batch fi eld to be included in the message. If
a batch is not running at the time the message is triggered, the Batch fi eld data is
replaced by ‘?????’. See
Section 4.3.10
for details of the Batch option.
Note: Group number must be entered if the batch is confi gured for Group mode.
Instrument Name: Allows the Instrument Name (as entered in Confi guration/Instru-
ment -
section 4.3.1
) to be included in the message.
Instrument Number: Causes the instrument number (Network/Address -
Section
4.5.1
) to be embedded.
Confi g Revision: Embeds the Confi g File Version number (System/About -
section
4.6.11
) in the message
Local User: Embeds the currently logged-in user (e.g. ‘Engineer’, ‘JohnW’, etc.)
{n} source
This fi eld appears only if the previous fi eld (Replace {n} with) is selected as ‘Specifi ed
Descriptor’, ‘Specifi ed Value’ or ‘Specifi ed alarm data’. The associated picklist(s) allow
a specifi c point, and a specifi c alarm (if appropriate) to be selected. It is thus possi-
ble to confi gure, say alarm 1 on channel 2, to produce a message giving the descrip-
tor and/or value of, say, totaliser 1.
Notes:
1. n = 1 to 9
2. The example below is intended to clarify message entry techniques.
