100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 105
HA028910
Issue 13 Sep 16
4.3.10 BATCH RECORDING CONFIGURATION (Cont.)
OPERATOR INITIATION (Cont.)
‘Values’ can now be entered for these headings by entering strings of up to 60 characters (including
spaces).
This may be done by touching the empty fi eld and using the resulting pop-up keyboard to type-in the
entry, or by touching the fi eld continuously for two seconds or more and then selecting one of the prede-
fi ned Batch Entry messages previously entered in the confi guration page. In the latter case, the prede-
fi ned message may be edited in the normal way before being Applied. Such editing has no effect on the
original message.
Once the entries are complete, operation of the Start button initiates batch recording. Operation of the
Store button saves the confi guration for later initiation by job, by counter or via MODBUS/TCP.
The Values entry page is replaced by the batch status page (fi gure 4.3.10c), this time showing details of
the batch in progress. This page allows the batch to be stopped or a new one triggered.
Note: Text may also be entered using a suitable keyboard connected via the USB port behind the
access fl ap or (if the relevant option is fi tted) one of the USB ports at the rear of the instrument
(
section 2.2
).
Figure 4.3.10b Batch values entry page
Batch Number:
Customer Name:
Operator name:
Supervisor:
Batch - Furnace1 Temps
Start Close
Store
060509.015
FishesRus
Marvin
00:0A:8D:00:20:A0
FishesRus
Marvin
Arthur
Tricia
Jason
Manky Clothes Ltd.
Rat's Nest Hair Co.
Batch Entry list.
Appears if batch entry area is touched
continuously for 2 seconds (approx).
List entries are made in Batch Config-
uration.
These keys not shown whilst the Batch
Entry list displayed
