epiphan video Pearl Nano, Руководство пользователя

Страница: 298 / 484

Pearl Nano User Guide Set up an SRT stream using caller and listener modes
4. Click the stream name to see the stream settings.
5. In the Connection mode field, select if this Pearl Nano is the caller or a listener.
a. If Caller is selected, do the following:
i. In the URL field, enter the IP address of the SRT destination (decoder) using the format
srt://<decoder-ip-address>:<port> , where the <decoder-ip-address> and <port> could be
provided by the CDN, media server, or be another SRT decoder device such as a
second Pearl Nano.
ii. (Optional) In the Source port field, enter the port number that this Pearl Nano should
use for SRT traffic.
b. If Listener is selected, enter the Port number that this Pearl Nano should use for SRT traffic.
See Network ports used by Pearl Nano to determine available ports.
6. (Optional) In the Stream ID field, enter a unique name for this stream.
7. (Optional) Check Encryption and choose the AES key length if the SRT destination requires AES
encryption. These settings must match the encryption settings of the destination device, see Set
AES encryption and a passphrase for SRT .
8. (Optional) If the SRT destination has a required security Passphrase along with the AES encryption,
you can enter that here.
9. (Optional) In the Latency field adjust the amount of latency to apply to the stream. The default
value is 125 ms.
We recommend using the default latency and recovery bandwidth overhead values for
an initial test stream. After you perform a test stream, you can determine the Quality of
Service (QoS) and calculate the latency requirements. To set the SRT stream latency, see
Adjust latency and view the SRT stream status .
10. (Optional) In the Recovery bandwidth overhead field, adjust the % value of the bandwidth that's
dedicate for SRT control and recovery packets. The default value is 25%.
11. (Optional) Rename the stream. Click the current name and enter a different name, then press
Enter .
Refresh your browser if the new stream name doesn't immediately display.
12. Click Apply .
13. When your ready to start streaming, click Start
285