Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 121 / 240

Proline Promag H 500 PROFIBUS DP Commissioning
Hauser 121
Configuring the switch output
Navigation
"Setup" menu → Pulse/frequency/switch output
‣
Pulse/frequency/switch output
1 to n
Operating mode →  121
Terminal number →  121
Signal mode
→  121
Switch output function →  122
Assign diagnostic behavior →  122
Assign limit
→  122
Assign flow direction check →  122
Assign status →  122
Switch-on value →  122
Switch-off value →  122
Switch-on delay →  122
Switch-off delay →  123
Failure mode
→  123
Invert output signal →  123
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output. • Pulse
• Frequency
• Switch Pulse
Terminal number – Shows the terminal numbers
used by the PFS output
module. • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3)
• 20-21 (I/O 4) –
Signal mode – Select the signal mode for the
PFS output. • Passive
• Active Passive