Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 92 / 240

System integration Proline Promag H 500 PROFIBUS DP
92 Hauser
9.2.1 Manufacturer-specific GSD
This GSD guarantees the unrestricted functionality of the measuring device. Device-specific
process parameters and functions are therefore available.
Manufacturer-specific GSD ID number File name
PROFIBUS DP 0x1570 EH3x1570.gsd
The fact that the manufacturer-specific GSD should be used is specified in the Ident
number selector parameter by selecting the Manufacturer option.
Where to acquire the manufacturer-specific GSD:
www.endress.com → Downloads area
9.2.2 Profile GSD
Differs in terms of the number of Analog Input blocks (AI) and the measured values. If a
system is configured with a Profile GSD, it is possible to exchange devices made by
different manufacturers. However, it is essential to ensure that the order of the cyclic
process values is correct.
ID number Supported blocks Supported channels
0x9740 • 1 Analog Input
• 1 Totalizer • Channel Analog Input: volume flow
• Channel totalizer: volume flow
0x9741 • 2 Analog Input
• 1 Totalizer • Channel Analog Input 1: volume flow
• Channel Analog Input 2: mass flow
• Channel totalizer: volume flow
0x9742 • 3 Analog Input
• 1 Totalizer • Channel Analog Input 1: volume flow
• Channel Analog Input 2: mass flow
• Channel Analog Input 3: corrected volume
flow
• Channel totalizer: volume flow
The Profile GSD that is to be used is specified in the Ident number selector parameter by
selecting the Profile 0x9740 option, Profile 0x9741 option or Profile 0x9742 option.
9.3 Compatibility with earlier model
If the device is replaced, the Promag 500 measuring device supports the compatibility of
the cyclic data with previous models. It is not necessary to adjust the engineering
parameters of the PROFIBUS network with the Promag 500 GSD file.
Earlier models:
• Promag 50 PROFIBUS DP
– ID No.: 1546 (hex)
– Extended GSD file: EH3x1546.gsd
– Standard GSD file: EH3_1546.gsd
• Promag 53 PROFIBUS DP
– ID No.: 1526 (hex)
– Extended GSD file: EH3x1526.gsd
– Standard GSD file: EH3_1526.gsd
9.3.1 Automatic identification (factory setting)
The Promag 500 PROFIBUS DP automatically recognizes the measuring device configured
in the automation system (Promag 50 PROFIBUS DP or Promag 53 PROFIBUS DP) and