Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 141 / 240

Proline Promag H 500 PROFIBUS DP Commissioning
Hauser 141
Using the parameter to reset the access code
Navigation
"Setup" menu → Advanced setup → Administration → Reset access code
‣
Reset access code
Operating time →  141
Reset access code →  141
Parameter overview with brief description
Parameter Description User interface / User entry Factory setting
Operating time Indicates how long the device has been in
operation. Days (d), hours (h), minutes
(m) and seconds (s) –
Reset access code Reset access code to factory settings.

For a reset code, contact your
Hauser service organization.
The reset code can only be entered via:
• Web browser
• DeviceCare, FieldCare (via service
interface CDI-RJ45)
• Fieldbus
Character string comprising
numbers, letters and special
characters 0x00
Using the parameter to reset the device
Navigation
"Setup" menu → Advanced setup → Administration
Parameter overview with brief description
Parameter Description Selection Factory setting
Device reset Reset the device configuration - either
entirely or in part - to a defined state. • Cancel
• To delivery settings
• Restart device
• Restore S-DAT backup Cancel
10.8 Simulation
The Simulation submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).
Navigation
"Diagnostics" menu → Simulation
‣
Simulation
Assign simulation process variable →  143