Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 135 / 240

Proline Promag H 500 PROFIBUS DP Commissioning
Hauser 135
Parameter Prerequisite Description Selection / User
entry
Factory setting
Value 3 display A local display is provided. Select the measured value that
is shown on the local display. • None
• Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
• Corrected
conductivity
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
*
• Current output 3
*
• Current output 4
*
• Temperature
• Electronic
temperature
None
0% bargraph value 3 A selection was made in the
Value 3 display parameter.
Enter 0% value for bar graph
display. Signed floating-point
number Country-specific:
• 0 l/h
• 0 gal/min (us)
100% bargraph value 3 A selection was made in the
Value 3 display parameter.
Enter 100% value for bar
graph display. Signed floating-point
number 0
Decimal places 3 A measured value is specified
in the
Value 3 display
parameter.
Select the number of decimal
places for the display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Value 4 display A local display is provided. Select the measured value that
is shown on the local display. • None
• Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
• Corrected
conductivity
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
*
• Current output 3
*
• Current output 4
*
• Temperature
• Electronic
temperature
None
Decimal places 4 A measured value is specified
in the
Value 4 display
parameter.
Select the number of decimal
places for the display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx