Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 108 / 240

Commissioning Proline Promag H 500 PROFIBUS DP
108 Hauser
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /). Promag300/500DP
10.6.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
Depending on the device version, not all submenus and parameters are available in
every device. The selection can vary depending on the order code.
Navigation
"Setup" menu → System units
‣
System units
Volume flow unit
→  108
Volume unit →  108
Conductivity unit →  109
Temperature unit
→  109
Mass flow unit →  109
Mass unit →  109
Density unit →  109
Corrected volume flow unit →  109
Corrected volume unit →  109
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Volume flow unit – Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• l/h
• gal/min (us)
Volume unit – Select volume unit. Unit choose list Country-specific:
• m³
• gal (us)