Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 154 / 240

Operation Proline Promag H 500 PROFIBUS DP
154 Hauser
Navigation
"Diagnostics" menu → Measured values → Output values → Relay output 1 to n
‣
Relay output 1 to n
Switch status →  154
Switch cycles →  154
Max. switch cycles number
→  154
Parameter overview with brief description
Parameter Description User interface
Switch status Shows the current relay switch status. • Open
• Closed
Switch cycles Shows number of all performed switch cycles. Positive integer
Max. switch cycles number Shows the maximal number of guaranteed switch cycles. Positive integer
11.5 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using the Setup menu (→  106)
• Advanced settings using the Advanced setup submenu (→  130)
11.6 Performing a totalizer reset
The totalizers are reset in the Operation submenu:
Control Totalizer 1 to n
Function scope of the "Control Totalizer " parameter
Options Description
Totalize The totalizer is started.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
hold The totaling process is stopped and the totalizer is set to its defined start value
from the
Preset value 1 to n parameter.
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n →  155