Endress+Hauser Proline Promag H 500, Руководство по эксплуатации

Страница: 111 / 240

Proline Promag H 500 PROFIBUS DP Commissioning
Hauser 111
10.6.4 Configuring the analog inputs
The Analog inputs submenu guides the user systematically to the individual Analog input
1 to n submenu. From here you get to the parameters of the individual analog input.
Navigation
"Setup" menu → Analog inputs
‣
Analog inputs
‣
Analog input 1 to n
Channel →  111
PV filter time →  111
Fail safe type →  111
Fail-safe value →  111
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Channel – Select the process variable. • Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
• Corrected
conductivity
• Temperature
• Electronic
temperature
• Current input 1
*
• Current input 2
*
• Current input 3
*
Volume flow
PV filter time – Specify the time to suppress
signal peaks. During the
specified time the analog input
does not respond to an erratic
increase in the process
variable. Positive floating-
point number 0
Fail safe type – Select the failure mode. • Fail-safe value
• Fallback value
• Off Off
Fail-safe value In Fail safe type parameter,
the Fail-safe value option is
selected.
Specify the values to be output
when an error occurs. Signed floating-point
number 0
* Visibility depends on order options or device settings
10.6.5 Displaying the I/O configuration
The I/O configuration submenu guides the user systematically through all the parameters
in which the configuration of the I/O modules is displayed.