Dell PowerConnect B-FCXs, Руководство по настройке

Страница: 39 / 1494

PowerConnect B-Series FCX Configuration Guide xxxix
53-1002266-01
About This Document
Introduction
This guide describes the following product families from Dell:
•
PowerConnect B-Series FCX Stackable Switches.
This guide includes procedures for configuring the software. The software procedures show how to
perform tasks using the CLI. This guide also describes how to monitor Dell products using statistics
and summary screens.
This guide applies to the PowerConnect models listed in Table 1 .
Device nomenclature
Table 1 lists the terms (product names) contained in this guide and the specific set of devices to
which each term refers.
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and
Layer 3 switching and routing.
If you are using a Layer 3 Switch, you should be familiar with the following protocols if applicable to
your network – IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, DVMRP, and VRRP.
TABLE 1
PowerConnect family of switches
This name Refers to these devices
PowerConnect Stackable Devices
NOTE: The PowerConnect Stackable Devices include the PowerConnect B-Series FCX devices.
PowerConnect B-Series FCX PowerConnect B-FCX624s,PowerConnect B-FCX648s,PowerConnect B-FCX624-E,
PowerConnect B-FCX624-I, PowerConnect B-FCX648-E, PowerConnect B-FCX648-I
NOTE: All PowerConnect B-Series FCX devices can be ordered from the factory as
-ADV models. ADV models include support for Layer 3 BGP. PowerConnect B-FCXE
and PowerConnect B-FCXI models require an optional SFP+ module to support
stacking.