Dell PowerConnect B-FCXs, Руководство по настройке

Страница: 1202 / 1494

1160 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Setting up local user accounts
32
Local accounts with encrypted passwords
You can create local user accounts with MD5 encrypted passwords using one of the following
methods:
•
Issuing the service password-encryption command after creating the local user account with a
username
<user-string> [privilege <privilege-level> ] password 0 command
•
Using the username <user-string> create-password command
NOTE
To create an encrypted all-numeric password, use the username <user-string>
create-password command.
If you create a local user account using the commands discussed in “Local user accounts with
unencrypted passwords” on page 1159, you can issue the service password-encryption command
to encrypt all passwords that have been previously entered.
Example
PowerConnect(config)#username wonka privilege 5 password willy
PowerConnect(config)#service password-encryption
If password masking is enabled, enter the commands this way.
PowerConnect(config)#username wonka privilege 5 password
Enter Password: willy
PowerConnect(config)#service password-encryption
Syntax: [no] service password-encryption
Create password option
As an alternative to the commands above, the create-password option allows you to create an
encrypted password in one line of command. Also, this new option allows you to create an
all-numeric, encrypted password.
You can enter.
PowerConnect(config)#username wonka privilege 5 create-password willy
Syntax: [no] username <user-string> [privilege <privilege-level> ] create-password
<password-string>
You can enter up to 255 characters for <user-string> . This string can be alphanumeric or
all-numeric.
The privilege parameter specifies the privilege level for the account. You can specify one of the
following:
•
0 – Super User level (full read-write access)
•
4 – Port Configuration level
•
5 – Read Only level
Enter up to 255 alphanumeric characters for <password-string> .