manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 69

Recorder

69

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The dialog consists of the following parts:

·

Unmark others: If this box is checked (default) only the packets selected by the dialog will be
marked and all others will be unmarked. If this box is not checked the packets selected by the
dialog will be marked additionally to the already marked packets and events. 

·

Include packets with errors: If this box is checked (default) packets with errors will be marked too,
otherwise they will not be marked. 

·

Type: In this box you specify the type of packets to be saved. You can choose between
isochronous and asynchronous. For isochronous packets, you can select between all isochronous
packets or one specific channel number. In the second case, only packets with this channel number
will be marked. For asynchronous packets you can select between all asynchronous packets or
packets with specific source and destination IDs. In the second case, only asynchronous packets
with this source ID and destination ID will be marked. The source and destination boxes use a
special format. They specify a bus and node number, separated by a ':' character. If the bus
number is 1023, the value 1023 is substituted by the word 'local'. The initial values in this box
depend on the packet that is selected in the Recorder at the moment you invoke this command. 

·

Range: In this box you specify the range of packets to be stored. You specify a 'First packet'
number and the 'Last packet' number. All packets in this range that fit the type above, will be
stored. The number of a packet is displayed (when the packet is selected) in the toolbar of the
Packet View (see below). Initially the packet range specifies all packets in the Recorder. 

·

Mark: Clicking the 'Mark' button will mark the specified packets (and optionally unmark the others).
After that, the dialog quits. 

·

Cancel: Clicking the 'Cancel' button will cancel the mark operation and no packets will be marked
or unmarked.

Unmark
You can use this command to unmark 'All' or a 'Range' of packets. When unmarking a 'Range' of packets,
the following dialog appears:

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды