DAP Technology 1394, Руководство по эксплуатации

Страница: 60 / 458

Commander
60 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
register layout
This part (most left) displays the layout of the selected register set. All phy registers are arranged in bytes.
One byte can hold several fields and one field may occupy several bytes. The field names and values are
included in the layout picture. Reserved bits and bits with fixed values have no label, but only a value.
register fields table
In the register fields table right to the layout, all fields of the selected register set are displayed with name
and its value. The value can be changed by the user. If a value is changed, the field will be displayed in
red until the change has been written to the register(s).
Node box
The node information consists of:
node popup list
Here you can select a node from which you want to read the register.
When you select a node, the register layout and register-fields table will be cleared.
base register - page register
You can select if the Analyzer should read the 'base registers' or 'page registers' by selecting the
corresponding selection button.
page
If you have selected the 'page register' set, you will be able to select a page number (from 0 to 7) here. If
page 0 is selected, you will also be able to select the port number below it (from 0 to 15).
port
If you have selected the 'page register' set, and you have selected 'page' number 0, you will be able to
select the port number here (from 0 to 15).
Read/refresh
Pressing this button will read the specified registers from the selected node.