manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 295

Internet Protocol version 4 (IP4)

295

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Chapter 16. Internet Protocol version 4 (IP4)

One of the protocols supported by the Protocol View of the Recorder is the Internet Protocol version 4
(IP4) protocol. The IP4-protocol analyzer software will scan through all transactions and packets to find
IP4-compliant Units and it will fill the 'relations' pane in the IP4 tab page with IP4-related items, as
described in Protocol View and 

Protocol Settings

. An example of the resulting 

Protocol View

 is displayed

below. 

It displays the result in three different parts. At the right (transactions and packets), all found packets and
transactions are displayed in the order they were detected on the bus. The left part (relations) shows the
relation between these items. The transactions and packets belonging together (e.g. all transactions that
form a single TCP connection) are grouped into tree items and these items are displayed hierarchically in
the 'relations' pane. In this tree you will find for instance: 

·

ICMP traffic 

·

TCP connections 

·

UDP packets 

·

ARP packets 

·

Bus resets 

The details of the item selected in the relations tree, are displayed in the middle part of the Protocol View.
It displays the fields defined for the selected item and the values of those fields.

Triple FireSpy

For triple FireSpys the Protocol View will look as follows:

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды