manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 192

Scriptor

192

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Note that the data is read from file during script upload from the specified file. When the script is running
on the Analyzer, the file data is already in Analyzer memory. 

After reading the data from file, the packet is sent and the controls on the control panel are updated. 

11.6.3. Erroneous Sending

For testing purposes it sometimes is useful to be able to create and send packets that contain errors. The
script explained on this page has precisely this purpose. The script can send packets that contain CRC
errors and incorrect data sizes on all  Analyzernodes, both in synchronous and asynchronous mode. 

11.6.3.1. How to use it

Control Panel Contents 
After loading the file "erroneousSend.fss" and clicking on the Control Panel tab, a Control Panel will be
shown as in the picture below. The Control Panel contains the following controls: 

Buttons Node A, Node B and Node C 
These buttons can be pressed and if the script is running, the buttons will remain down if they are enabled
and come back up if they are disabled. When one or more of these buttons are enabled, the packets will
be sent on the corresponding Analyzer nodes. 

Buttons "Data CRC error" and "Incorrect Data length" 
These buttons can be pressed and if the script is running, the buttons will remain down if they are enabled
and come back up if they are disabled. If the data crc button is enabled, all packets that are sent will have
an incorrect data CRC value. If the incorrect data length button is enabled, the header field "Data size
Stream Packet" will be set one byte bigger than the size of the actual data. 

Number of packets 
This is the exact number of packets that will be sent if one of the start buttons is pressed. 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды