DAP Technology 1394, Руководство по эксплуатации

Страница: 45 / 458

Commander
45 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
6.1.1. Topology
Select the topology page if you want to display the current bus topology. When connecting or
disconnecting nodes, you will see the topology picture change, reflecting the changed bus topology. See
above for an example of the Topology page.
With the 'Detailed view mode' button you can toggle between detailed and compact view mode. In
detailed view mode, you can select the options to be displayed inside the node rectangles in the picture
with the 'Select node display options' button, just like in the Topology View of the Recorder. The 'icons in
nodes' button enables the display of icons in the nodes. With the 'Port information' button, visualization of
port status and capabilities can be toggled. The ‘Bus and node information’ enables extra bus and node
information of the selected node. The 'Refresh view' button can be used to redraw the topology view in
case of changes the don't cause a bus reset. Finally, you can force a Bus Reset by clicking the 'Initiate
Bus Reset' button. The topology picture will be updated too if the bus topology changes.
Beware that the options "View icons in nodes" and "Port information" cause the application to read the
configuration ROM and PHY registers of other nodes on the bus. Such traffic initiated by the FireSpy is
visualized with the red led in the toolbar.
When the right mouse button is clicked on a node or port in the topology picture, a context menu pops up.
Depending on the node's capabilities, the context menu shows options including 'try to become the root
node' for a node, and 'suspend', 'resume', 'disable' and 'enable' for a port.