manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 392

Hardware

392

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

With these connectors the FireSpy can be connected to the IEEE1394 bus to be analyzed. Each
connector may be connected to the bus. The IEEE1394b ports are (top-down, left-right) A0, A1, A2, B0,
B1, B2, C0, C1, C2.
Depending on the exact model, each connector is transformer coupled.

24.1.3.4. FireSpy Rear

Power Switch
Using this switch the FireSpy can be switched on and off. When switched on, the Unit LEDs on the front
panel will light up orange to indicate they are starting up. Note that the power supply needs to be
connected to the FireSpy (see below) to be able to switch the FireSpy on.

Power Connector
The power supply must be connected to the FireSpy, using this connector. Note that, for safety reasons,
only the original power supply should be used. Whenever power is supplied to the analyzer, the Power
LED on the front panel will light up red. (Even when the Power Switch is in the Off position).

Auxiliary Connector
The auxiliary port will be discussed in a separate chapter. See 

Auxiliary connector ports

. 

USB3 Connector
The FireSpy must be connected to the computer using this connector. A USB3 cable, which is part of the
FireSpy-package, is connected between this connector and the USB3 port of the computer.

Serial Number
Each FireSpy has an 11-character serial number. This number is also programmed into the FireSpy and
can be read with the License Manager of the FireSpy application. The software will only work when a valid
license certificate is installed for the serial number of the currently connected FireSpy. See 

License

Manager

 for more information on license certificates.

24.1.4. FireSpy 3422bT, 3822bT

The FireSpy3x22bT bus analyzer series is world’s only PCIe-based multi-channel FireWire bus analyzer
product line. The different models differ only in their support for different speeds, architecturally they

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды