manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 410

Hardware

410

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.2.2.3. FireSpy Front

power led
This green led will light up when the power supply is connected to the FireSpy (see 'FireSpy 810 Rear'
below) and the FireSpy is switched on. It indicates the availability of power from the power supply

USB led
This green led will light up when the FireSpy is connected to the USB port of your computer (see 'FireSpy
810 Rear' below) and the computer is switched on. It indicates the availability of USB bus power.

ethernet led
This green led will light up when the FireSpy is connected through its ethernet port (see 'FireSpy 810
Rear' below) and the network is active.

The initialization led
This red led will light up when the FireSpy is performing an initialization of the firmware.

IEEE1394b connectors (2x)
With these connectors the FireSpy 810 can be connected to the IEEE1394 bus to be analyzed. One or
both connectors may be connected to the bus.
Both connectors are bilingual. This means that they can be connected to a 1394b (beta) port or to a 1394a
(legacy) port, by using the correct cables.

buzzer opening
Behind this hole a buzzer is installed.

active led
This red led will light up when the Scriptor is active. See Scriptor.

generator led
This red led will light up when the FireSpy Generator is active. See Generator.

record led

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды