DAP Technology 1394, Руководство по эксплуатации

Страница: 116 / 458

Recorder
116 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
types, then the Destination-Offset field will be enabled. you can put a condition on this field. But if you
also select a Response, this field will be disabled because it is not present in a Response packet.
There are also some buttons to quickly select multiple types at once:
All
Clicking this button will select all types.
None
Clicking this button will deselect all types.
Requests
Clicking this button will select all request types.
Responses
Clicking this button will select all response types.
With Data quadlet
Clicking this button will select all packet types, for which a data quadlet is present in the header.
With Data block
Clicking this button will select all packet types, for which a data block may follow the header.
Acknowledge
Here you can select all different acknowledge types, including invalid and erroneous acknowledge or
packets without acknowledge. A packet will only fit the set if it has one of the specified acknowledge
types. By default they are all checked, which in fact means that there is no condition on acknowledge
type.
When the no acknowledge checkbox is checked, the packet does fit the set when it is not acknowledged
by any acknowledge packet (any 8-bit packet).
When the others (invalid and erroneous) checkbox is checked, the packet fits the set when an invalid or
erroneous acknowledge is detected for the packet. An erroneous acknowledge is an acknowledge packet
(8-bit packet) for which the inverse check fails. An invalid acknowledge is an acknowledge for which the
4-bit invert check is ok, but with an invalid ack type.
There are also some buttons to quickly select multiple types at once:
All
Clicking this button will check all checkboxes, which in fact means that there is no condition on the
acknowledge.
Any Ack
Clicking this button will check all checkboxes except the no acknowledge checkbox. This means that the
packet will fit the set if there is an acknowledge. It doesn't matter if it is an invalid acknowledge or even
erroneous one, as long as there is one.
No Ack
Clicking this button will check only the no acknowledge checkbox. This means that a packet does fit the
set when it does not have an acknowledge.
Not Compl.
Clicking this button will select all acknowledge types indicating that a request is not completed yet. The
selected types are the Pending, Tardy and the three Busy types.
Errors
Clicking this button will select all packet types indicating an error and will select the others (invalid and
erroneous> checkbox.
Header Values
Here you can specify additional header-field conditions. As mentioned above, only those fields will be
enabled that are present in all packet types selected in the Primary-Packets box. For each enabled field, a