DAP Technology 1394, Руководство по эксплуатации

Страница: 235 / 458

Mil1394 Protocol support
235 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Using the cursor line in the plot view at the bottom you can navigate through all the frames and show the
signal values captured in a specific frame number.
The next step would be to actually capture some data. This could easily be done in either of two ways:
· Connect another FireSpy and run the example Script called "Mil1394ScriptExample.fss" it will transmit
some values from file and some other values can be controlled on its control panel
· On a triple FireSpy, connect nodes A and B. Open the same script as in the above step but change the
FIRESPY_NODE macro at the top of the script from 0 to 1 and then start the script.
In the Mil1394 Signal monitor press the "Clear" button in the main toolbar of the Mil1394 Signal Monitor to
clear all captured data and prepare for the next run and then press start.
13.1.2. Details
13.1.2.1. Menu
File
New
With this command you can clear the current contents and start working on a new and empty document.
Open
With this command you can open an existing Mil1394 Signal Monitor file. By default these files have an
extension of .fsm.
Save
With this command you can store the current contents of the Mil1394 Signal Monitor to file. This includes
both the signal definitions as any recorded data.
Save as...
Same as the above, however, always asks for a file name even if the data was already stored to file
before.
Import
·
Control Panel: Allows loading controls from a text file, replacing the current Control Panel contents.